Locking clamp
The CoxDENS® PP locking clamp is an innovative plastic product which ensures that installed single wall rigid plastic flue gas outlet products cannot disconnect.
First locking clamp with integrated solution for thermal expansion.
How does it work
A plastic flue gas system expands and contracts during each heating and cooling cycle. In certain markets, to prevent the flue gas system from ‘walking apart’, brackets are not considered sufficiently certain in this respect and so additional protection against disconnection has to be applied. With this locking clamp you can create an extra pull safe connection in just a few seconds. A reassuring thought for you as an installer and as a consumer. Furthermore, this product can be used when installing a plastic flue gas outlet system in a shaft. By connecting the individual products to each other, with the inclusion of locking clamps, they cannot fall apart during installation. Moreover, during the flue systems life, it is guaranteed that the individual products continue to stay as one system during each heating cycle.
Quick and easy assembly
Open the locking clamp and put it around the top of the sleeve. Equipped with a double closure, double certainty is obtained by clicking in 2 clicks. Fully insert the next flue gas component and retract to the stop (about 10 mm). The assembly is ready.
Innovative locking clamp with integrated solution for thermal expansion
Safety
The CoxDENS® PP locking clamp provides a pull safe rigid plastic flue gas system. It has been established by an independent inspection institute that the locking clamp can withstand a load of at least 45 kg (≈ 450 N) for 5 minutes.
Specifications CoxDENS® PP locking clamp:
- Available in Ø 60, 80 and 110 mm.
- Made from high quality UV-resistant unbreakable PP.
- Easy to close and re-open for repositioning.
- Resistant up to a flue gas temperature of 120°C (T120).
- Suitable for the rigid flue systems CoxDENS® PP and CoxDENS® PPs.
- Tested and certified according to ULC-S636.
