Fire-rated wall plates
Flame proof and heat insulation: a must-have
Cox Geelen's fire rated wall plates are heat insulating. When renovating an existing shaft, there is usually limited space available. The installer also hardly has any influence on the materials already present in the shaft; often drawings of the existing situation are not correct or it is hard to see what is in the shaft. In order to be prepared for these types of uncontrollable risks, a fire collar alone is really not sufficient. Cox Geelen's wall plates are flame-proof as well as heat insulating, a must-have for flue gas and chimney renovations!
► By installing a fire-resistant wall plate over the opening in the shaft, the flue gas discharge and air supply are restored to at least the same fire resistance requirements as the shaft wall itself.
Neatly cover an opening in the wall and also provide a fire and carbon monoxide safe situation in the home. Due to the round shape, a deviation from a blunt drill or a small twist does not stand out. A slope of 3 ° is secured in the design, making a draining connection to the boiler.
For CoxDENS® PP FLEX systems
The CoxDENS® PP Flex fire rated wall plates with integrated chimney bend and flex connection are equipped with the clever click-system that guarantees a pull-safeight connection.
Standard available with shaft elbow 45° or 87° for connection to flexible pipes CoxDENS® PP Flex diameter Ø60 or Ø80 mm. Connection to heating appliances is always concentric Ø 60/100 mm.
CONNEXT® and CoxDENS® PP/Alu
The CoxDENS® fire rated wall plates are equipped with a CONNEXT® connection or a connection to PP/Alu concentric systems with silicon seal.
Available as standard in a concentric version with a diameter of 60/100 mm.
Connection to CoxHYBRID® CFS PP
The fire rated wall plates CoxDENS® with integrated CoxHYBRID® connection are equipped with clever bayonet lock to ensure a tensile proof connection.
Available as standard in single wall or concentric for connection to the CoxHYBRID® CFS PP collective flue renovation system in Ø 60/100 mm.
These revolutionary wall plates neatly cover an opening in the wall and also provide a fire and carbon monoxide safe situation in the home.
Why round? Because small deviations, if any, will then not be visible.
Specifications
- Fireproof chimney termination according to the standard.
- Fire-resistant classification and thermally insulating with a classification of EI60 and higher.
- Ideal for renovation projects, as well as for the construction of multi-storey buildings.
- Designed for plastic pipes in the shaft: flexible, rigid or concentric. The connection to the boiler is always concentric 60/100 mm.
- Fire resistant round wall plate.
- Flame retardant (E) + 60 minutes thermal insulation (I).
- Design ensures correct slope of 3° for condensate drainage towards boiler.
- Concentric connection 60/100 mm.
- Complies with building requirement fire prevention of 60 minutes between two fire compartments.
- Fireproof wall plate, fire protection seal and mounting are integrated in a single product.